Operation; Basic Playback; General Operation; Video Control During Playback - Yamaha DV-SL100 Mode D'emploi

Operation

Basic Playback

Press STANDBY/ON on the front panel to turn on the
1
DVD player.
Press / (OPEN/CLOSE) on the front panel to open disc
2
loading tray.
Place the chosen disc in the tray, with the label facing up.
3
Press / (OPEN/CLOSE) again to close the tray.
4
➜ After recognizing this disc, the player begin to
playback automatically.
Notes:
– DVDs may have a region code. Your player will not play
discs that have a region code different from the region code
of your player.
– If 'DISC LOCK' is set to LOCK and the disc inserted is not
authorized, the 6-digit code must be entered and/or the disc
must be authorized (see 'DISC LOCK').

General Operation

Note: All instructions set out below refer to the remote
control, unless otherwise stated.

Video control during playback

DVD VCD VCD
DVD
STOP
You can resume the play from the point at which you
1
stopped last time, if you just press STOP once. It will start
from the beginning if you press STOP twice to stop
playback.
DVD VCD
DVD
PAUSE/STEP
To get a still picture, press PAUSE during playback.
1
To step forward to the next frame picture, press PAUSE
2
again.
To resume normal playback, press PLAY.
3
SKIP
Press ¡1 or 2™ briefly during playback to go to the next
1
chapter/track or to return to the beginning of the currect
chapter/track respectively.
Press ¡1 twice briefly to step back to the previous
2
chapter/track.
To go directly to any chapter/track, enter the chapter/
3
track number using the numeric buttons and press
ENTER/OK.
Note: Press and hold 2™ or ¡1 for more than two seconds
to search forward or backward.
8
CD SVCD CD SVCD
VCD CD SVCD CD
SVCD
DVD VCD VCD VCD
DVD
SEARCH
To search the contents in fast speed, press 2 or 1 for fast
1
forward/backward searching.
Press 2 or 1 again to increase the speed for searching.
2
Press PLAY to return to normal playback.
3
Slow Motion
DVD DVD
To get a slow motion effect during playback, press 3 or
1
4.
Press 3 or 4 again, you can get different playback
2
forward/backward speeds.
Press PLAY to return to normal play back.
3
VCD VCD SVCD SVCD
To get a slow motion effect during playback, press 4.
1
Press 4 again, you can get different playback forward
2
speeds.
Press PLAY to return to normal play back.
3
Note: The SLOW BACKWARD function is not available for
VCD/Super VCD discs.

Audio control during playback

DVD VCD VCD VCD
DVD
MUTE
Press MUTE to disable the sound output.
1
Press MUTE again to deactivate the mute.
2
Audio channel selection
VCD VCD CD CD SVCD SVCD
Super VCD has two stereo audio channels which are
1
used for playing karaoke or the audio language selection.
(for instance, you can choose one channel for only the
music background of the song while you play the
karaoke.)
Press AUDIO to select the audio channels you want.
2
VCD has only one stereo audio channel, you can select
3
STEREO, MONO LEFT, MONO RIGHT or MIX-
MONO by pressing AUDIO.
➜ STEREO: Output the left and right audio channels of
the disc through the left and right audio jacks accordingly.
➜ MONO LEFT: Output the left audio channels of the
disc through the left and right audio jacks.
➜ MONO RIGHT: Output the right audio channels of
the disc through the left and right audio jacks.
➜ MIX-MONO: each of the audio jacks can output the
same audio effect as stereo.
CD SVCD CD SVCD SVCD
CD SVCD CD SVCD SVCD