Automatic Start/Stop Unit (A S/S Unit) - Yamaha EDL7000SE Manuel D'utilisation

49

AUTOMATIC START/STOP UNIT (A S/S UNIT)

AUTOMATIC START/STOP UNIT (A S/S UNIT)
To connect the machine to the A S/S UNIT the
generator is equipped with the ectt on the left side
panel of the control panel.
To connect the exterior apparatus with the machine,
perform the following instructions;
1. Remove the terminal taps cover.
2. Connect the unit to the ectt with the wiring
harnesses, following the operator's manual of the
A S/S unit.
3. To assemble the ttc, set the ttc.
For nomenclature and connection of terminal taps are
referred to the "WIRING DIAGRAMS" section. (See
page 50–55)
(1) Plate
(2) Exterior connection terminal taps (ectt)
(3) Terminal taps cover (ttc)