When the batteries are removed or replaced all
your photos will remain safe in the camera memory
or SD card.
Battery lock
2
Charging the battery
Connect the camera to your computer's USB port
through the USB cable provided while the camera is
turn off. This starts the charging automatically.
When the battery is being charged, there is a green
LED indicator light up in the USB connector area.
When this indicator is turn off, the charging is
completed.
Switching the camera on
To switch your camera on, press and hold the mode
button.
To switch your camera off, press the mode button*
until the Setup Screen shows up. Press the down
button to highlighte Power Off and then press the
shutter button to switch your camera off.
Your camera will automatically turn itself off in 60
seconds if unused to conserve battery power.
* see schematic diagram on the opened out side