Fisher & Paykel RB36S Guide De L'utilisateur page 49

Masquer les pouces Voir aussi pour RB36S:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Solving operating problems
Problem
Drawer skin not
sitting flush with
cabinetry.
Storage
compartment too
warm or too cold.
Food freezing
when set to
Fridge mode.
Food freezing
when set to chill
mode.
Ice buildup
inside freezer
compartment.
Possible causes
Drawer skin not fitted or
adjusted correctly.
Temperature setting not correct. Refer to Temperature adjustment section.
Frequent drawer openings.
Warm, humid weather.
Drawer not sealing or closing
properly.
Large amount of food recently
added.
The storage mode of the
compartment has recently been
changed.
Temperature setting not correct. Refer to Temperature adjustment section.
Food placed directly in front of
air outlets.
Temperature setting not correct. Refer to Temperature adjustment section.
Items with high water content
may freeze.
Drawer not sealing correctly.
Frequent drawer openings.
High humidity environment.
Before you call for service
What to do
Adjust drawer skin. Refer to Installation
instructions.
Minimize drawer openings to allow
temperature to stabilize.
Minimize drawer openings to allow
temperature to stabilize.
Move items in compartment so drawer
can close tightly.
Check that seal is sitting flat and sealing
tightly.
Check that drawer skin is not clashing
with surrounding cabinetry.
Minimize drawer openings to allow
temperature to stabilize.
Wait for the storage mode icon on control
panel to stop flashing and recheck
temperature.
Move chill sensitive foods away from the
back wall of the appliance.
Select Fridge storage mode.
Move items in compartment so drawer
can close tightly.
Check that drawer seal (gasket) is sitting
flat and sealing tightly.
Minimize drawer openings.
Not unusual during periods of high
humidity. Wipe out.
47
EN

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Rb90s

Table des Matières