Fault Alarm; Control Panel Beeps - Fisher & Paykel RB36S Guide De L'utilisateur

Fault Alarm

If the electronic controller detects a fault which may affect operation, an alarm
will sound and the fault icon on the display panel will flash. The audible alarm
will stop when any button is pressed but the lights will continue flashing.
If such a fault occurs, call your Fisher & Paykel Appliances Authorized Service Center immediately;
the fault alarm sound will help the service person find and remedy the cause of failure.
Important!
Your refrigerator is designed to operate for many years without the need for service checks.
However, if your refrigerator is malfunctioning, have it attended to by your Fisher & Paykel
Appliances Authorized Service Center as soon as possible. All electrical repairs must be carried
out by an adequately trained service technician or qualified electrician.

control panel beeps

The control panel beeps can easily be silenced, if you prefer quiet operation.
To turn control panel beeps on or off:
Press the LOCK
Press and hold the LOCK
icon turns off or on.
Drawer alarms
If the drawer is left open an alarm will sound after 60 seconds.
If the drawer remains open, subsequent beeps will sound every 30 seconds until the drawer
is closed.
After 5 minutes the alarm will sound continuously and the compartment light will turn off.
General operating instructions
button for 3 seconds to unlock the control panel.
and COLDER buttons for 4 seconds until the beep
27
EN