Cleaning - V.ORLANDI E 40 Serie Instructions De Montage, D'utilisation Et D'entretien

INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
1) The drawbar coupling shall be cleaned after every service with or
without the trailer attached and after every repairing or
maintenance operation;
2) The coupling shall be cleaned also before use after a long period
out of use;
Keep the operating handle clean, free from oily or greasy
3)
substances in order to avoid risks when opening the coupling;
4) Clean the coupling with high pressure air jet directed on to and
around - the coupling pin.
chapter 3.1. COUPLING UP , page 12/32) and blow the lower bush
clean with the air jet.
N
O
High pressure water cleaning is not recommended other than around
T
the coupling pin and the coupling jaw.
E
DRAWBAR COUPLING E 40

6 CLEANING

Open the coupling (see point 1 in
PAG.
29/32
CHAP . 6
REV. 00