Care And Cleaning - Fisher & Paykel CDV2 Serie Guide D'utilisation

Manual cleaning chart
WHAT?
HOW OFTEN?
Stainless steel
base
After every use
Control knobs
As required

CARE AND CLEANING

HOW?
1 Soak any stubborn stains
under a hot soapy cloth.
2 Wipe the soiling off with a
cloth using a mild household
detergent or stainless steel
cleaner.
3 Wipe with a clean damp cloth.
4 Wipe the surface dry with a
microfiber cloth.
5 For extra shine, use a suitable
stainless steel polish.
Hard water spots can be
●
removed with household
white vinegar.
1 Wipe with a damp cloth using
a solution of mild detergent
and hot water.
2 Dry thoroughly with
microfiber cloth.
If wished, the knobs can be
removed for cleaning. Before
removing a knob, make sure
that it is set to OFF, then pull
it straight upwards. Remove
only one knob at a time, and
make sure that you refit it
on its shaft completely and
correctly after cleaning.
IMPORTANT!
Do not use abrasive cleaners,
●
steel soap pads or sharp
objects on stainless steel.
Always read the label to
●
make sure that your stainless
steel cleaner does not
contain chlorine compounds
as these are corrosive and
may damage the appearance
of your cooktop.
Always rub the stainless steel
●
in the direction of the grain.
The graphics are etched onto
●
the steel by laser and will
not rub off.
Do not use stainless steel
●
cleaner or oven cleaner on
these parts, as doing so may
damage their coating.
EN
13