Ingeteam INGEREV CITY CW116 Manuel D'installation Et Usage page 23

Installing and connecting the unit
2. As previously stated, this unit has two cabling accesses. If the rear cabling access is used, at this point
of the installation and cabling the power cable should now have been inserted following the guidelines in
the section "7.2.1. Installing the unit".
Otherwise, if you prefer to use the bottom cabling access, follow the instructions below.
3. Remove the bottom cover to access the cabling.
4. Remove the two bolts that appear in the following figure.
ABA2020IQM01_A - Installation and Operation Manual
Ingeteam
EN
ES
FR
IT
23