Memory Function; Storing Measured Values; Recalling The Measured Values - Hartmann TENSOVAL Duo Control Mode D'emploi

for the first user. Using
store the measured values for a
second user (see 5.1 "Storing mea-
sured values").
In order to switch off the device,
press the START / STOP button.
Otherwise the device will switch
itself off automatically after 3 min-
utes.

5. Memory function

5.1 Storing measured values

The device features two memory
buttons and
ment results for two different users.
represents the measured values
for a first user,
measured values for a second user.
When a beep indicates the end of
measurement, you may press
to apply the measured value to
the respective person. This assign-
ment can be made as long as the
values are displayed. If you do not
assign them, the measured value is
automatically stored to the dis-
played measurement memory.
1
The time the measurement was
taken is always stored with the
you can
to store measure-
represents the
or
blood pressure values in order to
determine e.g. the morning or
evening averages correctly. The
time stored in the device must
therefore match the actual time of
day. (see 3.2 „Setting date and
time").
5.2 Recalling the measured
values
Tensoval duo control keeps handy
the following measurement mem-
ories (corresponding to the ESH
(European Society of Hypertension)
guidelines)
Individual measurement memory
Average value of all measured
blood pressure values per user
Average value of the morning
values
Average value of the evening
values
The device must be switched off to
recall data from the measurement
memory. Press the memory button
for recalling the first user's
stored values and the memory but-
ton for the second user's values.
The corresponding symbol and/or
will be displayed.
Tensoval duo control distinguishes
between values measured in the
morning and in the evening.
Initially, the average of the morning
values over the last seven days for
the selected person is displayed
133
English
GB