Flash Bracketing Series (Fb) - Metz MECABLITZ 58 AF-2 digital Mode D'emploi

Setting procedure:
• Press the
Select
ars on the display.
Beep
• Use the
Remote
menu. The selected menu item will be highlighted
Set
against a dark background.
• Press the
selection.
ON
• Choose the setting desired using the
keys. The setting takes effect immediately.
Set
• Press repeatedly to return the display to its normal reading. If the key
not pressed, the display will switch back to normal automatically after approxi-
mately 5 seconds.
M F 4.0
MZoom 24
10 m ISO 200
button repeatedly until „Select" appe-
Sel
and keys to select „BEEP" from the
key to confirm the special function
Set
and
When the beep function is turned on,
☞
the symbol is also displayed on
the LC display.

7.3 Flash Bracketing Series (FB)

A series of flash exposures (flash-bracketing FB) can be carried out in the
TTL A
E and automatic flash modes. A flash bracketing series consists
of three successive flash shots with different flash exposure correction values.
When a flash bracketing series is set, FB and the correction value appear on the
display. The possible correction values range from 1/3 to 3 apertures in one-
third aperture increments.
Setting procedure:
• Press the button repeatedly until „Select"
Sel
appears on the display.
• Select the menu option „FB" by pressing the
and keys. The selected menu option will be
highlighted.
• Confirm the selection of the special function by pres-
sing the button.
Set
• Select the desired setting with the
keys. The setting takes effect immediately.
• Press the button repeatedly until the screen is reset to its normal view. If the
button is not pressed, the display is automatically reset to its normal view
after about 5 seconds.
TTL
Remote
Select
FB
Standby
Set
FB
1 1 /
3
and
Set
,
127