Machinery Directive - CDV Group DIGIWAY DWS102 Serie Manuel D'installation Et Utilisation

Automatic pedestrian doors fall into the application field of the Machinery Directive (98/37/CE).
This says that the installer who motorises a door or a gate has the same obligations as the manufacturer of machinery and
as such must :
1. prepare the Technical Construction File ( which must contain the documents indicated in Annex V of the Machinery
Directive) and must be kept and placed at the disposal of competent national authorities for at least ten years from the
date of manufacture of the motorised door.
2. Draft the EC Declaration of Conformity in accordance with Annex II-A of the Machinery Directive
3. Affix the CE marking on the power operated door in accordance with point 1.7.3 of Annex I of the Machinery Directive.
The installed must consign to the customer the following documents :
1 Instructions on how to operate and safely use the system.
2. The routine maintenance instructions.
3. The declaration of conformity.
4. The maintenance register.
The operator DIGIWAY type DWS102xx belongs to the Service Class 5 ( 600 cycles a day for 5 years min).
Applications : HEAVY DUTY , for vehicle or pedestrian accesses to institutional complexes with very intense use.
The manufacturer
Herewith declares that the automatic system for swing doors
- is intended to be incorpored into machinery or to be assembled with other machinery to constitute a
machinery covered by Directive 98/37/EC.
- is inconformity with the provisions of the following other EEC directives :
- it is not allowed to put the machinery into service until the machinery into which it has to be incorporated or
of which it has to be a component has been found and declarated to be in compliance with the provisions of
Directive 98/37/EC
S.Pietro di Feletto, 29/12/2006
Pag. 18

Machinery Directive

Instructions for use
Declaration of the Manufacturer
( according to Directive 98/37/CE, Annex II part B )
ELPRO INNOTEK SPA
Via Piave,,23
31020 S.Pietro di Feletto (TV)
Brand : DIGIWAY
Types : DWS102AX, DWS102SX
72/23/CEE ( Low Voltage Directive )
89/336/CEE ( Electromagnetic Compatibility Directive )
99/05/CE ( R&TTE )
89/106/CEE
A CDV Group product
ITALIA
G. Massimo Dalle Carbonare
( Product manager )