Alde Compact 3010 Instructions D'utilisation Et De Montage page 13

6. Heating with electricity
Do as follows to active heating with electricity. The greater the power, the better the heating performance.
In choosing between electricity and gas, electricity is given priority.
+22°C
2 kW
ON
Off On
7. Heating with gas
Do as follows to activate heating with gas. If both electricity and gas are selected, electricity is given priority.
+22°C
2 kW
ON
Off On
8. Unlocking the tool menu
It is possible to go from the setting menu to the tool menu. Under the tool menu you can access the other functions of
the control panel, described in section 9.
1. The control panel in setting
menu. Press the unlock symbol.
+22°C
2 kW
ON
Off On
1. Start and step between the
various power steps (Off, 1kW,
2kW or 3kW) with the + button
or – button. The set value is dis-
played on the screen. When ac-
tivated the plus symbol changes
colour to green. (Certain boilers
are equipped with max 2 kW,
selecting 3kW is not possible in
these cases.)
1. Start the gas operation by
pressing On. The On symbol is
activated and changes colour to
green.
2. The settings are ready and the
boiler is working at set tempera-
ture.
3. In order to switch off gas opera-
tion, press Off.
2. The control panel in unlocking
menu. Press on open padlock,
then OK or MENU to unlock the
tools menu. When activated
the symbol changes colour to
green.
OK
2. The settings are ready and the
boiler is working at set tem-
perature.
3. To switch off the electrical
operation, step with the
– button to Off.
3. The control panel in setting
menu with unlocked tool menu.
In order to get to the tool menu,
press the symbol.
+22°C
2 kW
ON
Off On
13