Brief Instructions - Conrad 61 06 30 Mode D'emploi

15. Brief Instructions

Set weekday (chapter 11. a)
• Briefly push the button "DAY"
Setting the time (chapter 11. b)
• Push the button "HOUR" to set the hours, the button "MIN" to set the minutes (keep the button
pushed for quick adjustment)
Select Heating or Cooling Mode (chapter 11. c)
• Briefly push the button "PROG", then the button "CL/HT" (display shows "HT" = heating
mode, "CL" = cooling mode)
• To leave the setting mode, either briefly push the button "OK" or wait for 10 seconds
Setting the comfort and savings temperatures (chapter 11. d)
• Briefly push the button "TEMP"
• For setting the comfort temperature, push the button "
adjustment)
• For setting the savings temperature (=night reduction), push the button " " (keep it pushed
for quick adjustment)
• To leave the setting mode, either briefly push the button "OK" or wait for 10 seconds
Manual selection of comfort or savings temperature (chapter 11. e)
• Depending on desired operating mode, briefly push the button "
full hour, automatic operation will be used again
• If you desire manual operation for an extended time (e.g. for a party), push the respective
button repeatedly to set the time from 1 - 23 hours. After the end of this time, automatic
operation is used again.
Select the switching programme (chapter 11. f)
• First use the button "DAY" to select the weekday, then briefly push the button "PROG".
• Select the desired switching programme with the button "PROG#" (switching programmes
0-9 are pre-programmed and cannot be changed).
For switching programme 11-19, use the button "
select comfort or savings temperatures for the respective times.
• Use the button "PROG" to switch to the next day and set the switching programme there, or
the button "OK" to leave setting mode (alternatively wait for 10 seconds without pushing any
button).
50
" (keep it pushed for quick
" or " " once; at the next
" or " " for the 24 hours of the day to