Preparation For Use; Filter Installation - Sharp KC-C70E Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46

PREPARATION FOR USE

FILTER INSTALLATION

To maintain the quality of the filters, they are packed in plastic bags and placed in the
unit. Be sure to remove the filters from the plastic bags and replace the filters in the
unit before initial use.
1
Remove the filters
1
Remove the Back Panel.
Gently push down on the
tabs, then tilt and remove the
back panel.
Back Panel
2
Remove the Wash-
able Deodorizing Filter
(black) and HEPA Filter
(white) from the plastic
bags.
HEPA Filter
Washable
Deodorizing
Filter
Tabs on the top
Unplug the unit before installing
or adjusting the filters.
2
Install the filters
1
Install the HEPA Filter.
Please make sure that the HEPA Filter is
placed in proper orientation.
Installing the filter backwards
will affect the performance of
the unit.
Tab
2
Insert the Back Panel's 2 bottom tabs
(left and right) into the small holes in the
unit, and slide the Washable Deodor-
izing Filter between the HEPA Filter and
the Back Panel.
Washable Deodorizing Filter
Back Panel
Bottom tabs
3
Gently push in
the upper tabs
(left and right) to
lock in place.
4
Fill in the usage
start date on the
Date Label.
Use the usage start date
as a guide for when the
filters should be replaced.
E-6
HEPA Filter
Upper tabs
Date Label

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kc-c100eKc-c150e

Table des Matières