Preparation; Filter Installation - Sharp FU-S40E Manuel D'utilisation

PREPARATION

FILTER INSTALLATION

To maintain the quality of the filters, they are installed in the main unit and packed in
plastic bags. Be sure to remove the filters from the plastic bags before using the unit.
1
Remove the filters
Remove the Front Panel.
1
Pull the Front Panel on the
lower sides, and lift up.
Remove the Filter Support
2
Push in the hooks on top, then pull the Filter Support
Remove the HEPA Filter.
3
Remove the HEPA Filter from the
4
plastic bag.
Remove the Active Carbon Filter from
5
the carton box, and also remove from
the plastic bag.
All manuals and user guides at all-guides.com
Be sure to remove the power plug from the wall outlet.
HEPA Filter
E-6
Front Panel
Filter Support
HEPA Filter
Active Carbon Filter
(At open)