Preparation For Use; Filter Installation - Sharp KC-840E Manuel D'utilisation

PREPARATION FOR USE

FILTER INSTALLATION

To maintain the quality of the fi lters, they are packed in plastic bags and placed in the
unit. Be sure to remove the fi lters from the plastic bags and replace the fi lters in the
unit before initial use.
1
Remove the fi lters
1
Remove the Back Panel.
Gently push down on the tabs,
then tilt and remove the back
panel.
Back Panel
2
R e m o v e t h e W a s h -
able Deodorizing Filter
(black) and HEPA Filter
(white) from the plastic
bags.
HEPA Filter
Washable
Deodorizing
Filter
Tabs on the top
Unplug the unit before installing
or adjusting the fi lters.
2
Install the fi lters
1
Install the HEPA Filter.
Please make sure that the HEPA Filter is
placed in proper orientation.
Installing the filter backwards
will affect the performance of
the unit.
Tab
2
Insert the Back Panel's 2 bottom tabs
(left and right) into the small holes in the
unit, and slide the Washable Deodor-
izing Filter between the HEPA Filter and
the Back Panel.
Washable Deodorizing Filter
Back Panel
Bottom tabs
3
Gently push in the up-
per tabs (left and right)
to lock in place.
4
Fill in the usage start
date on the Date Label.
Use the usage start date as
a guide for when the fi lters
should be replaced.
E-6
HEPA Filter
Upper tabs
Date Label