Daily Programming; Weekly Programming; Weekend Programming; Language Selection - ZANTIA KERA Manuel D'utilisation Et D'entretien

Instructions for use
4.5.1

DAILY PROGRAMMING

To enable/disable and set the daily chronothermostat func-
tions.
fig. 21 control panel - daily programming
You can set two operating time slots according to tab. 7,
where the OFF setting tells the clock to ignore the command:
Selection Description
START 1 activation time
STOP 1 deactivation time
START 2
activation time
STOP 2 deactivation time
tab. 7 operating time slots setting
4.5.2

WEEKLY PROGRAMMING

To enable/disable and set the weekly chronothermostat func-
tions. Access via the menu: Set chrono -> weekly program ->
See item chap. 4.3
fig. 22 control panel - weekly programming
The weekly programmer is provided with 4 independent pro-
grams, whose final effect is the combination of the 4 single
programs. The weekly programmer can be activated or deac-
tivated. Moreover, by setting OFF in the time field, the clock
will ignore the corresponding command.
Program with care, avoiding any activation or
deactivation time overlap in the same day in
different programs.
Program 1
Selection Description
START PROG 1 Activation time
STOP PROG 1 Deactivation time
MONDAY PROG 1
TUESDAY PROG 1
WEDNESDAY PROG 1
THURSDAY PROG 1
FRIDAY PROG 1
SATURDAY PROG 1
SUNDAY PROG 1
tab. 6 fan adjustment

Another 3 weekly programming levels are avail-
able.
Mod. KERA rev 01
4.5.3
To enable/disable and set weekend chronothermostat func-
tions (days 5 and 6, i.e. Saturday and Sunday).
Possible values
time - OFF
• Deactivate the daily program if you want to use the
time - OFF
weekly program.
• Always keep the weekend program deactivated when
time - OFF
using weekly programs 1, 2, 3 and 4.
time - OFF
• Activate the weekend program only upon deactivat-
ing the weekly one.
4.6
This allows you to select the dialogue language among those
available. To modify the language, go to the menu 03 - Choose
language, using the keys (1) and (2) fig. 18a to scroll the items
until you reach the desired language.
4.7
Activates the "STAND-BY" mode which switches off the stove
after the room temperature has remained higher than the set
value beyond the default time. When the stove switches off in
this condition, it can only switch back on when the set tem-
perature is lower than the room temperature for a determined
amount of time. To modify the mode, go to the menu 04-
Standby mode, and use the keys (1) and (2) fig. 18a to acti-
Settable status
vate it/deactivate it.

Time - off
4.8
When set at "OFF" the acoustic signal is disabled. To modify
On/off
the mode, go to the menu 05 - Buzzer, and use the keys (1)
and (2) fig. 18a to activate it/deactivate it.
translated from the original text

WEEKEND PROGRAMMING

fig. 23 control panel - weekend programming
• To prevent misunderstandings and unwant-
ed start-up or switch-off, activate only one
program at a time if you are not sure of what
you want to obtain.

LANGUAGE SELECTION

fig. 24 control panel - language selection

STANDBY MODE

This function is to be set with the technician dur-
ing first ignition.

BUZZER MODE

EN
45