Secomam UviLine Serie Manuel D'utilisation page 92

3. Connect the USB medium to the spectrophotometer.
4. Switch on the spectrophotometer if necessary.
Press « » and « » keys to select « USB memory » as a source and press <START·ENTER> key.
The update process takes about five minutes.The spectrophotometer switches itself off and then on again.
Remark
If the update cannot be carried out, an error message appears on the display.
Check whether the "Update" folder with its subfolders is stored on the USB memory device (top level).
If on the photometer there is not enough free memory capacity for the update, you can create memory capacity by erasing
measurement data. Save your data to a USB memory device before erasing them on the photometer.
Gamme UviLine
- 108 -