Mounting Steps - Lenze E84AZESR5524LD Instructions De Montage

6 Electrical installation

Mounting steps

Connecting cable to
the controller
3/PE AC 400 V
Cable data
E84AZESR5524
E84AZESR1534
6.4 Mounting steps
How to connect the filter:
1. Connect the filter output cable to the X100 terminal strip at the standard
device.
2. Connet the mains cable to the mains terminal of the filter.
3. Attach the PE conductor on the supply side to the PE conductor screw.
–
The PE connection must comply with EN 61800-5-1.
46
Description
L1' Filter output conductor (lead with wire end ferrules, colour BK).
L2'
L3'
PE Output-side PE conductor (lead with wire end ferrule, colour
GN/YE).
e84ZESR027
L1, L2, L3, PE
2
[mm ]
[AWG]
2.5
14
16.0
6

EDK84ZESR55 DE/EN/FR/ES/IT 2.0