Mechanical Installation; Mounting Steps - Lenze ERBM R W Série Instructions De Montage

5

Mechanical installation

Mounting steps

5 Mechanical installation
Mounting steps
How to mount the brake resistor:
1. Select a suitable mounting location.
– The mounting location must always ensure the
operating conditions mentioned in the technical data; if
required, additional measures must be taken.
– Ensure unimpeded air circulation for heat dissipation.
2. Screw down the brake resistor at the mounting location.
– The mounting location and the mounting material must
ensure the permanent mechanical connection.
34
l
EDKRBM470R DE/EN/FR 6.0