Mounting Steps - Lenze Global Drive EZN3B0055H060N003 Instructions De Montage

3 Mechanical installation

Mounting steps

3.2 Mounting steps
How to mount the filter:
1. Read the chapter "Mechanical installation" in the documentation of the basic
device. Read up particularly on ...
– Precautionary measures while mounting
– Installation material required
– Compulsory starting torques
– Bore spacings and free spaces
2. If the filter is connected to the controller in push−through technique or cold−plate
technique, remove the bottom part 0 by releasing 6 screws.
3. Mount four fixing brackets 1 to the mains filter.
4. Mount the mains filter in the control cabinet.
28
l
EZN3BT005
EDKZN3BT DE/EN/FR 1.0