Mounting Steps - Lenze ECS K001 Série Instructions De Montage

3 Mechanical installation
Mounting with fixing rails (standard installation)

Mounting steps

3.2.2 Mounting steps
How to mount the capacitor module:
1. Prepare the fixing holes on the mounting plate.
–
Apply a drilling jig for this purpose.
2. Take the fixing rails from the accessory kit in the cardboard box.
3. Push the rails into the slots of the heatsink:
–
From above: push in the long side.
–
From below: push in the short side.
4. Fix the capacitor module onto the mounting plate.
46
l
EDKCSEK002 DE/EN/FR 3.0