Switching The Subtitles; Using The Direct Function; Moving Subtitles; Switching The Audio - Pioneer ELITE BDP-88FD Mode D'emploi

Switching the subtitles

04
For discs or files on which multiple subtitles are recorded,
the subtitles can be switched during playback.
Caution
• The subtitles cannot be switched for discs recorded
by a DVD or BD recorder. Also refer to the operating
instructions for the device used for recording.
 During playback, press SUBTITLE.
• The current subtitle and total number of recorded
subtitles are displayed on the TV screen.
To switch the subtitle, press SUBTITLE again.
• The subtitles can also be switched by selecting
Subtitle from the FUNCTION menu.
• If the subtitles are not switched when SUBTITLE is
pressed, switch them from the disc menu screen.
 Turning the subtitles off
 Press SUBTITLE several times or select Subtitle
from the FUNCTION menu to switch the setting to
Off.
 About displaying external subtitle
files while playing DivX media files
In addition to the subtitles recorded in DivX media files,
this player also supports the display of external subtitle
files. If a file has the same name as that of a DivX media
file aside from the file extension and the extension is one
of the extensions listed below, the file is treated as an
external subtitle file. Note that DivX media files and
external subtitle files must be located in the same folder.
Only one external subtitle file can be displayed on this
player. Use a computer, etc., to delete any external
subtitle files you do not want to display from the disc.
Text files with the extensions ".smi", ".srt", ".sub" and ".txt"
are supported.
Note
• Depending on the file, the external subtitles may not
be displayed properly.

Using the DIRECT function

When the DIRECT function is turned on, the digital audio
output and video output are blocked and analog audio is
played back with high quality. This function is turned Off
upon shipping.
 Press DIRECT.
• Each time the button is pressed, the setting switches
between On and Off.
• When the DIRECT function is turned on, the DIRECT
indicator on the main unit turns on.
30
En
Note
• When you turn on the DIRECT function and play, the
output volume may be low depending on the settings
of this device and contents being played.
• Depending on disk or file, DIRECT function will not
work in some cases if playback is not stopped
(resume playback function is in cancelled state). To
cancel the resume playback function, press  while
playback is stopped.

Moving subtitles

The position of the subtitles displayed while playing BD-
ROMs or DVDs can be moved.
1 Play the BD-ROM or DVD video and display the
subtitles on the TV screen.
2 Press and hold the SUBTITLE button for at least 2
seconds.
• The is set.
Subtitle shift mode
• [Subtitle shift mode] is displayed on the TV screen.
Use the / buttons to move the position of the
3
subtitles.
• Use the / buttons to move the position of the
subtitles.
• Once the setting is complete, press ENTER.
Subtitle shift mode
4 Cancel the
Press the ENTER button.

Switching the audio

For discs or files on which multiple audio streams/
channels are recorded, audio streams/channels can be
switched during playback.
 During playback, press AUDIO.
• The current audio and total number of recorded audio
streams are displayed on the TV screen.
To switch the audio, press AUDIO again.
• The audio can also be switched by selecting Audio
from the FUNCTION menu.
• If the audio is not switched when AUDIO is pressed,
switch it from the disc menu screen.
Switching the CD/SACD
playback area
1 Select the area you want to play.
In the stop mode, press CD/SACD. The playback area
switches on the front panel display window each time the
button is pressed.
[CD AREA]  [SACD 2CH]  [SACD MCH]  (back to
beginning)
• During playback, press  twice to cancel continuous
play before selecting the playback area.
.