Sony RM-VLZ620 Mode D'emploi page 11

To clear automatic power-on
control for a Sony device
The Device Select buttons are preset
to automatically turn on the selected
device when pressed. To clear auto
power-on control, perform the
procedure below.
1
Press and hold SET for more
SET/SET
indicator
Device
Select
buttons
2
Enter  -  - .
, 
3
Press the Device Select
To cancel the process
Press SET anytime.
than 3 seconds.
While keeping SET held
down, press , then release
both buttons.
The SET indicator
lights up.
The SET indicator flashes three
times to indicate that the setting
mode has been entered.
3 flashes
button you want to change.
The SET indicator flashes three
times, and the indicators turn off.
3 flashes
11
US