Example: Operating Room Temperature Control - Siemens Synco 700 RMS705 Manuel D'utilisation

Example: Operating room temperature control

Your RMS705 can also be used as a controller for a
number of physical variables. Operation of room
temperature control is described here as an example.
The RMS705 maintains the 2 adjusted setpoints (heating
and cooling). The control can be on or off, depending on
the selected operating mode On, Off, or Auto
( page 11).
Icon Operating
Impact on the building
mode
On The setpoint will be maintained, thus
I
ensuring comfortable room conditions
Off Plant not in operation
0
* Guide values (corresponding to the default factory settings)
Path:
Path:
Building Technologies / HVAC Products
Welcome > Main menu > Controller 1... > Setpoint low
Welcome > Main menu > Controller 1... > Setpoint high
CE1B3123x2-en
Setpoints low and high according to the table below can
be adjusted. The default factory settings represent the
recommended setpoints.
You can change the setpoints to suit your needs (refer to
the menu path below).
Setpoint low (heating)*
21 °C
---
74 319 0503 0 a
Setpoint high (cooling)*
24 °C
---
15
06.04.2006