User Settings - Airzone FLEXA 3.0 Manuel D'utilisation

User settings

Use this parameter to control and change all the basic functionalities. Touch once to
display the shortcuts. Press on the icons to access the parameters.
EN
Language/Country: Select your language.
Brightness: You can set the brightness intensity and determine whether want
to activate the screen brightness while the screensaver is displayed or not.
Date and time: Press on the clock to set the time, the format type (12 or 24
hours) and if you want the system to change the time automatically. Press on
the calendar to set the date.
Clean screen: Select this option if you want to clean the screen. The screen will
lock for a few seconds in order to help you clean it.
Screensaver You can define the information displayed on the screensaver.
Depending on your system configuration, you can select:
• State of the zone: it displays information about the state and configuration
of the zone.
• Weather information: Only available with Webserver Airzone Cloud.
• AC unit consumption: only available for computers with consumption
reading.
• If you disable the information option, only the time and state will be
displayed.
Information. This parameter provides information on:
• Zone: firmware, zone, association, actuator or status of the communications.
• System: firmware, settings and information about the system controllers.
• Devices: It displays the elements connected to the system.
• Webserver: How to configuration and how to associate it, IP address and
MAC address.
• Errors: Warnings on system incidents.
9