Home Screen (Temperature Control); Operating Modes - Airzone FLEXA 3.0 Manuel D'utilisation

Home screen (temperature control)

With just one touch, the thermostat goes from the screensaver to home screen. There
we can find the following functions:
EN
Operating mode
Eco-Adapt function
Set-point temperature
Relative humidity
Air conditioning control
Time schedule

Operating modes:

ventilation and stop. (See air conditioning control and operating modes on pages 6
and 7).
Eco-Adapt saving function: It offers several energy efficiency levels and also adapts
the temperatures to boost the efficiency of your system. (See air conditioning control;
Eco-Adapt saving functionon page 7).
Fan Speed: It sets the operating speed of the AC unit fan. (See fan speed, on page 8).
Current zone/Room temperature: It indicates the zone where the thermostat
is located. The name of the zone can be edited. It also works as shortcut to zone
navigation. (See navigation through zones on page 8). It displays the current
temperature of the zone where the Blueface is located.
User settings: From this parameter you can control several functions such as the
language, the screen brightness, the screensaver, etc. (See page 9).
Set-point temperature: Press on the temperature to set the set point. (See air
conditioning control on page 6).
Relative humidity: It indicates the humidity of the zone.
5
Select among the available modes: cooling, heating, dry,
System speed
Current zone/Room temp.
User settings
On/off
Zone settings
System consumption