Airzone Think; Screensaver - Airzone FLEXA 3.0 Manuel D'utilisation

AIRZONE THINK

2
How to use the Airzone Think

Screensaver

EN
When the screensaver is displayed, you will see the following information:
Date
Settings menu
Zone state
Home screen/Confirm
Date: Informative parameter defined by the master controller in user settings (see
user settings (Airzone Blueface) on page 9).
Settings menu: The sleep mode parameters can be configured at any time. If you
have a Master Think, you can change the mode. In addition, in fancoil installations,
you can also select the speed. (See page 16).
Zone state: It displays information about the general settings of the zone: the state
(on/off ) and the operating mode. In case of failure, it also displays all the errors (see
warnings and errors, page 17).
Control bar: It adjusts (by pressing or by sliding) all the parameters controlled by the
Think.
Airzone: A button used to confirm and return to home.
On/off: On/off of the zone where the thermostat is located.
13
Control Bar
On/Off