Blueface Thermostat; Main Screen Display - Airzone ZBS BLUEFACE Mode D'emploi

BLUEFACE THERMOSTAT

MAIN SCREEN DISPLAY

EN
Operation mode
EN
User mode
Current Room
FR
Temperature/
Relative humidity
IT
PT
Zone demand
DE
Local ventilation
Time schedule
programming
Operation Mode. Displays the current mode of temperature control: Cool, Heat, Auto and Emergency Heat (depending on the
installation). Direct expansion systems include Dry mode.
User Mode. Allows to quickly change the configuration of the system with preloaded settings adapted to daily situations: Eco,
Vacation, Stop, Comfort, Unoccupied or Night time.
Airflow. Depending on the installation, regulates the airflow quantity. Available options: Silence, Standard, Power.
Current Zone/Zone Navigation Menu. Displays the current zone and allows access to zone navigation menu.
Current Room Temperature. Displays the current room temperature where the thermostat is located.
Note: The range of measured room temperature goes from 10
limits, the temperature will be displayed as < 10
Relative Humidity. Displays the relative humidity of the zone.
Current Set Point Temperature. The programmed temperature for a zone. Press the set point temperature to switch between
heating and cooling set points. Press + or - to manually adjust the set point temperature by increments of ± 0.5 C/1 F.
Zone Demand. This icon only will be displayed if the zone is actively cooling or heating the space.
Local Ventilation. Allows the activation or deactivation of the fan in the selected zone when the system is no longer actively
cooling or heating the zones.
Note: Press the Local Ventilation icon to change its value.
Time Schedule Programming. This menu enables to program the system and to activate/deactivate time schedules.
User Settings. This parameter controls several functions such as the language, screen brightness, etc.
Zone Settings:
Timer. Automatically switches off the zone after 30, 60 or 90 minutes.
Heating stages*. Select the stage to be controlled in heating and cooling: Air, Radiant or Air+Radiant.
Lite Settings. Available when navigating to a wired Lite Thermostat from a Blueface Thermostat.
*Note: Available for some types of installations and system configurations.
6
0 C/50 0 F to 35
0 C/50 0 F or > 35 5 C/90 0 F.
Airflow
Current zone/ Zone
navigation menu
Current Set Point
On/Off
Zone settings
User settings
5 C/90 0 F, if the room temperature is out of these