Lighting Instructions - Napoleon TQ285-1 Mode D'emploi

8

Lighting Instructions

EN
WARNING!
!
WARNING!
slowly turn on the gas supply valve (large propane cylinder).
2. Push and turn any main burner control knob slowly to the 'hi' position. This action
position and wait 5 minutes for any excess gas to dissipate, either repeat steps 2 and 3
5. If lighting the unit with a match, clip the match into the supplied lighting rod. Hold
the lit match down through the grill while turning the corresponding burner valve to
!
WARNING!
because they are very small and light blue. Heat can be felt when hovering your hand 6-8 inches over
the grills surface, indicating proper function.
www.napoleon.com
Burner Control
Open lid
Ensure all burner controls are in the off position. Connect a disposable cylinder or
3. If the burner does not ignite, then immediately turn the control knob back to the
'off' position and repeat step 2 several times.
4. If the burner will not ignite within 5 seconds, turn the control knob to the 'off'
The normal operating burner flames may not be visible in daylight after ignition
Main Burner Lighting
1. Open grill lid
will ignite the selected burner.
or light with a match.
high.
Clip supplied lighting
rod to regulator bracket.
N415-0535 Nov 02.20