Lighting Instructions - Napoleon PRO500-3 Mode D'emploi

8

Lighting Instructions

EN
!
WARNING!
WARNING!
gas supply valve.
1. Open grill lid.
2. Push and turn any main
burner knob slowly to the high
position. If the pilot lights,
continue to push down on the
control knob until the burner
lights and then release.
3. If the pilot does not ignite,
then immediately turn the
control knob back to the 'off
position and repeat step 2
several times.
4. If the pilot and burner will
not ignite within 5 seconds,
turn the control knob to
the 'off' position and wait 5
minutes for any excess gas to
dissipate. Either repeat steps 2
and 3 or light with a match.
5. If lighting the unit with
a match, clip the match
into the supplied lighting
rod. Hold the lit match
down through the grill and
sear plate while turning the
corresponding burner valve
to high.
!
WARNING!
www.napoleon.com
Side
Burner
Left Left Centre
Igniter
Burner
Open lid
Ensure all burner controls are in the off position. Slowly turn on the
Main Burner
Lighting
1. Open grill lid.
2. Remove warming rack.
3. Turn rear burner control to high
position.
4. Press and hold
igniter button until burner lights,
or light by match.
5. If ignition is not immediate,
turn burner control off. Wait 5
minutes. Repeat.
Do not use rear burner while operating main burner.
Right Centre Rear
Burner Burner Burner
Rear Burner Lighting
(if equipped)
1. Open burner cover.
2. Turn side burner control to high
position.
3. Press and hold
igniter button until burner lights, or
light by match.
4. If ignition is not
immediate, turn burner control off.
Wait 5 minutes. Repeat.
Lights
Right
Burner
Off Position
Side Burner Lighting
(optional)
N415-0539 SEP 25.20