Fein ASW18-6 PC Serie Mode D'emploi page 17

OBJ_BUCH-0000000390-001.book Page 17 Wednesday, June 12, 2019 7:40 AM
Mounting the angle head (ASW 18-6 PC (**)/ASW 18-12 PC (**)) (figure 6).
Release the clamping sleeve and remove it.
Clean the threaded surface with a soft cloth.
Make sure that the clamping cone is free
of grease.
Mount the clamping sleeve again and fasten it.
Screw the angle head into the clamping
sleeve.
Fig. 6
1.
2.
3.
m
4 m
4.
5.
6.
en
17