Whirlpool ACM 406 Mode D'emploi page 5

regulations. Do not repair or replace any part of
the appliance unless specifically stated in the user
manual.
• The power cable must be long enough for
connecting the appliance, once fitted in its
housing, to the power supply.
• Power cable replacement must be carried out
by a qualified Technician. Contact an authorized
service centre.
• Regulations require that the appliance is earthed.
• For installation to comply with current safety
regulations, an omnipolar switch with minimum
contact gap of 3 mm must be utilized.
• Do not use multiple plug adapters or extension
leads.
• Do not pull the power supply cable in order to
unplug the appliance.
• The electrical components must not be accessible
to the user after installation.
• During and after use, do not touch the heating
elements or interior surfaces of the appliance - risk
of burns. Do not allow the appliance to come into
contact with cloths or other flammable materials
until all the components have cooled sufficiently.
• At the end of cooking, exercise caution when
opening the appliance door, letting the hot air or
steam exit gradually before accessing the oven.
When the appliance door is shut, hot air is vented
from the aperture above the control panel. Do not
obstruct the vent apertures.
• Use oven gloves to remove pans and accessories,
IMPORTANT SAFETY INSTRUCTIONS
5