Troubleshooting - Whirlpool ACM 406 Mode D'emploi

Some of the problems occur because of simple maintenance oversights or operation mistakes and
can easily be resolved without having to call for technical assistance.
PROBLEM
The appliance is not working
During use of the ceramic glass
hob, the residual heat warning
light does not switch on
The electric oven is not
working
The thermostat is not working • Call our Service Centre.
The electric thermostat
warning light does not switch
on during use
The oven light does not switch
on
Warning: Servicing should be carried out only by authorised personnel.

TROUBLESHOOTING

• Check the plug is in.
• Check that the knobs are set correctly for cooking and then
repeat the operations given in the handbook.
• Check the electrical system safety switches (RCD). If there is
failure in the system call an electrician in.
• Turn the knob round to a hotter temperature.
• Turn the knob of another element.
• Call our Assistance Centre.
• Check that the programmer accessory, if there is one, is on the
manual position and then repeat the operations described in
the manual.
• Turn the thermostat round to a hotter temperature.
• Turn the selector round to a different function.
• Make sure the lamp is firmly screwed in place.
• Buy a lamp for high temperatures at one of our Service Centre
and fit it following the instructions given in the REPLACING
THE OVEN LAMP paragraph.
24
REMEDY