Device Front / Connections; 12 Volt Outputs - Calira EVS 17/16-DS/IU Mode D'emploi

-
$% ./ ./#)% *+

Device front / connections

1 2 3
Fig. 4: Device front / connections
1 230 Volt input
2 230 volt output
3 Potential equalisation
4 12 V output consumer
5 Refrigerator absorber changeover
switch - compressor
See connection section for more details!

12 volt outputs

Consumer
The output to the consumers (fig.4, Pos. 4 and 8, contact 1 to 3 and 7 to 9) only
carry +12 volt, if the user relay has switched on. The consumer relay only
switches on if +12 V control voltage is applied to contact no. 4 of the 7 pole
plug. User circuits 1 / 7 and 2 / 8 are each protected with a 10 A fuse, and user
circuits 3 / 9 are protected with a 15 A fuse.
! "
Lerchenfeldstr. 9 87600 Kaufbeuren Tél. : +49(0)8341 / 9764-0 Fax : +49(0)8341 / 67806
4 5 6 7 8 9 10
6 AGM / gel battery changeover
switch - liquid electrolyte battery
7 Connection for temperature sensor
8 12 V output consumer
9 Board Control connection
10 12 Volt battery input
# 31