Table des Matières
Publicité
PROGRAMMING
8. Press
to return to "PROGRAMMING MODE MENU
ITEMS"
9. Press
again to exit.
To Turn Clean Mode On/Off:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
two, (2) times. "PROGRAMMING MODE SYSTEM
SETUP" is displayed.
5. Press
sixteen, (16) times. "CLEAN MODE YES (or NO)" is
displayed.
6. Use
and
to turn Clean Mode On or Off.
7. Press
to save the changes.
8. Press
to return to "PROGRAMMING MODE MENU
ITEMS"
9. Press
again to exit.
To Add a Product Name in Library:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
three, (3) times. "PROGRAMMING MODE PROD
NAME LIB" is displayed.
5. Press
. "PROD NAME LIB" is displayed.
6. Press
. "PROD NAME LIB" will be displayed on the top
line, with a flashing cursor on the bottom line.
7. Use
and
to change the character, (A-Z, 1-9,
<space>, and hyphen are available). Use
move the cursor position.
8. Press
to save the new product name. "SAVE LIBRARY
ADD" is displayed.
9. Press
to save. "PROGRAMMING MODE PROD NAME
Page 28
continued
and
to
LIB" is displayed.
10. Press
to exit.
To Modify a Product Name in Library:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
three, (3) times. "PROGRAMMING MODE PROD
NAME LIB" is displayed.
5. Press
. "PROD NAME LIB" is displayed.
6. Use
and
to select Product Name to be modified.
7. Press
. The first character in the Product Name will
start flashing.
8. Use
and
to change the character, (A-Z, 1-9,
<space>, and hyphen are available). Use
move the cursor position.
9. Press
. "SAVE LIBRARY ADD" is displayed.
10. Press
. "SAVE LIBRARY MODIFY" is displayed.
11. Press
to save. "PROGRAMMING MODE PROD NAME
LIB" is displayed.
12. Press
to exit.
Service Mode
To Change SCK Address:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
three, (3) times. "PROGRAMMING MODE SERVICE
MODE" is displayed.
5. Press
one, (1), time. "Address XX" is displayed.
6. Use
and
to change to the desired SCK Address.
7. Press
to save the changes.
8. Press
to return to "PROGRAMMING MODE SERVICE
MODE"
and
Part # 4517124 Rev. 7 (08/17/11)
to
Publicité
Table des Matières
