Table des Matières
Publicité
PROGRAMMING
Menu Items...
To Change the Cook Time of a Product:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter Programming Mode. "PROGRAMMING
MODE MENU ITEMS" is displayed.
4. Press
. "MENU ITEMS STANDBY" is displayed.
5. Use
and
to choose the desired Menu Item.
6. Press
to display "(MENU ITEM) COOK TIME XX:XX"
7. Use
and
to adjust the cook time.
8. Press
to save the changes.
9. Press
twice to exit.
To Turn Platen, (2-Sided), Cooking On/Off:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
. "MENU ITEMS STANADBY" or" MENU ASSIGNED
TO BUTTON 1" is displayed.
5. Use
and
to choose the desired Menu Item.
6. Press
twice to display "(MENU ITEM) UPPER PLATEN
YES/NO ".
7. Use
and
to turn upper platen on or off.
8. Press
to save the changes.
9. Press
twice to exit.
To Change Upper Platen Set Temperature:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
. "MENU ITEMS STANADBY" or" MENU ASSIGNED
TO BUTTON 1" is displayed.
Page 22
continued
5. Use
and
to choose the desired Menu Item.
6 Press
three, (3) times to display "(MENU ITEM) UPPER
TEMP XXX" displayed in °F or °C.
7. Use
and
to change the set temperature to the
desired value.
8. Press
to save the changes.
9. Press
twice to exit.
To Change Grill Set Temperature:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
. "MENU ITEMS STANADBY" or" MENU ASSIGNED
TO BUTTON 1" is displayed.
5. Use
and
to choose the desired Menu Item.
6. Press
four, (4) times to display "(MENU ITEM) GRILL
TEMP XXX" displayed in °F or °C.
7. Use
and
to change the set temperature to the
desired value.
8. Press
to save the changes.
9. Press
twice to exit.
To Change Product Gap Setting:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
. "MENU ITEMS STANADBY" or" MENU ASSIGNED
TO BUTTON 1" is displayed.
5. Use
and
to choose the desired Menu Item.
6. Press
five, (5) times to display "GAP XXX" displayed in
inches or mm.
7. Use
and
to change the gap setting to the desired
value.
8. Press
to save the changes.
9. Press
twice to exit.
Part # 4517124 Rev. 7 (08/17/11)
Publicité
Table des Matières
