Table des Matières
Publicité
Liens rapides
INSTALLATION AND
OPERATION MANUAL
GARLAND GD SERIES
GAS COUNTER UNITS
FOR YOUR SAFETY:
DO NOT STORE OR USE GASOLINE
OR OTHER FLAMMABLE VAPORS OR
LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER
IMPROPER INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR MAINTENANCE
CAN CAUSE PROPERTY DAMAGE, INJURY,
OR DEATH. READ THE INSTALLATION,
OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR
SERVICING THIS EQUIPMENT
Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent
using genuine Garland replacement parts. Garland will have no obligation with respect to any product that has been
improperly installed, adjusted, operated or not maintained in accordance with national and local codes or installation
instructions provided with the product, or any product that has its serial number defaced, obliterated or removed,
or which has been modified or repaired using unauthorized parts or by unauthorized service agents.
For a list of authorized service agents, please refer to the Garland web site at http://www.garland-group.com.
The information contained herein, (including design and parts specifications), may be superseded and is subject
to change without notice.
GARLAND COMMERCIAL INDUSTRIES
185 East South Street
Freeland, Pennsylvania 18224
Phone: (570) 636-1000
Fax: (570) 636-3903
Part # 4519762 (03/06)
Part # 4519762 (12/07)
APPLIANCE
WARNING:
GARLAND COMMERCIAL RANGES, LTD.
1177 Kamato Road, Mississauga, Ontario L4W 1X4
CANADA
Phone: 905-624-0260
Fax: 905-624-5669
PLEASE READ ALL SECTIONS OF THIS MANUAL
AND RETAIN FOR FUTURE REFERENCE.
THIS PRODUCT HAS BEEN CERTIFIED AS
COMMERCIAL COOKING EQUIPMENT AND
MUST BE INSTALLED BY PROFESSIONAL
PERSONNEL AS SPECIFIED.
IN THE COMMONWEALTH OF MASSACHUSETTS
THIS PRODUCT MUST BE INSTALLED BY A
LICENSED PLUMBER OR GAS FITTER. APPROVAL
NUMBER: G-1-07-05-28
For Your Safety:
Post in a prominent location, instructions to be
followed in the event the user smells gas. This
information shall be obtained by consulting
your local gas supplier.
Enodis UK LTD.
Swallowfi eld Way, Hayes, Middlesex UB3 1DQ ENGLAND
Telephone: 081-561-0433
Fax: 081-848-0041
© 2005 Garland Commercial Industries, Inc.
Page 1
Publicité
Table des Matières
Manuels Connexes pour Garland GD Serie
Sommaire des Matières pour Garland GD Serie
- Page 1 Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent using genuine Garland replacement parts. Garland will have no obligation with respect to any product that has been improperly installed, adjusted, operated or not maintained in accordance with national and local codes or installation instructions provided with the product, or any product that has its serial number defaced, obliterated or removed, or which has been modified or repaired using unauthorized parts or by unauthorized service agents.
-
Page 2: Important Information
IMPORTANT INFORMATION WARNING: This product contains chemicals known to the state of california to cause cancer and/or birth defects or other reproductive harm. Installation and servicing of this product could expose you to airborne particles of glass wool/ceramic fibers. Inhalation of airborne particles of glass wool/ceramic fibers is known to the state of california to cause cancer. -
Page 3: Table Des Matières
TABLE OF CONTENTS IMPORTANT INFORMATION ............2 SPECIFICATIONS . -
Page 4: Specifications
Garland/U.S. Range products are not approved or authorized for home or residential use, but are intended for commercial applications only. Garland / U.S. Range will not provide service, warranty, maintenance or support of any kind other than in commercial applications. -
Page 5: Installation
INSTALLATION General Clearances 1. Carefully remove unit from carton or crate. Burner tie MINIMUM INSTALLATION CLEARANCES TO wires and other packing material should be removed ADJACENT COMBUSTIBLE/NON-COMBUSTABLE from units. On stainless steel units, the protective WALLS OR BASE material covering the stainless steel should be removed Sides &... -
Page 6: Gas Connections
INSTALLATION Continued Gas Connections Leg Installation 1. The installation and connection must comply with local The leg channel is located on the package base. This channel codes, or in the absence of local codes, with CAN/CGA- must be installed when using the legs. B149 Installation Code or with the national Fuel Gas Code, ANSI Z223.1/NFPA No. -
Page 7: Installation Of Non-Combustible Counter Stands (Optional)
INSTALLATION Continued Note: Griddles may not rest evenly on the unit body if units 2. Remove and discard leveling bolts on unit to be installed are not leveled. on a non-combustible counter stand. 2. Remove sheet metal screws at rear of unit. 3. -
Page 8: Adjustments
ADJUSTMENTS Burner Adjustments – All Units 2. BEFORE LIGHTING THE PILOT, fill the fry tank. NEVER OPERATE THE PILOT OR BURNER WITH AN EMPTY FRY 1. Before making any adjustment, turn all gas valves TANK. It only takes a few minutes to completely ruin a fry to “OFF”. -
Page 9: Shutdown Instructions
ADJUSTMENTS Continued Shutdown Instructions For the griddle equipped with thermostats the pilot and the main burner are controlled by the ON-OFF valve. MAKE SURE To shut down fryer for a short period, turn automatic gas THE THERMOSTAT IN ON OFF POSITION. Turn on the main valve knob to the “PILOT”... -
Page 10: Broilers
ADJUSTMENTS Continued 5. Hold the shaft steady and with a small flat screw driver 3. Turn dial to “LO” position, then remove dial. turn the calibration screw located inside the shaft 4. With a screwdriver, turn the small adjusting screw inside clockwise to decrease temperature or anti-clockwise to the valve stem and adjust to obtain the low cooking increase temperature. -
Page 11: Operation For "Ff" Models
OPERATION FOR “FF” MODELS Open Type Hot Plate 4. When the pilot is established, push the tap in again and turn it anti-clockwise to the full flame position “ ” to light All burners are equally rated and may be used either for the main burner. -
Page 12: Operation All Modles
OPERATION ALL MODLES Lighting Standing Pilots - All Models 5. Depending on the appliance type: Lower the front black enamel panel to the unit and These units are not designed to be disconnected from immediately depress the red button, which is the their gas connections and re-installed on a regular basis. -
Page 13: Parts And Service
Scotch-Brite scouring pads or Stainless scouring pads. DO NOT USE ORDINARY STEEL WOOL. PARTS AND SERVICE It is easy to keep your Garland equipment working in top Technical information and/or parts literature is available condition. through your local Authorized Garland Service Agency or direct from Garland. - Page 14 Page 14 Part # 4519762 (12/07)