Publicité
Les langues disponibles
Les langues disponibles
Compatible with most Minn Kota ® Electric-Steer, Bow-Mount Trolling Motor models, including the Ulterra™, Terrova ® , PowerDrive™,
PowerDrive V2, and PowerDrive Pontoon.
Item /
Part #
Description
Assembly
A
2992370
STABILIZER, BOW MOUNT E.STEER ASM
Items 2-22
2
2372675
PIN, BOW MOUNT STABILIZER
4
2373720
PLUNGER, BOW MOUNT STABILIZER
6
2370111
KNOB, BOW MOUNT STABILIZER, TRI-LOBE
8
2371680
BASE, REMOVABLE, BOW MOUNT STABILIZER
10
2373300
SWIVEL BASE, BOW MOUNT STABILIZER
12
2373825
STRAP, BOW MOUNT STABILIZER
14
2373142
NUT-HEX, M6, BOW MOUNT STABILIZER
16
2373640
ROD, BOW MOUNT STABILIZER
18
2371991
BASE, BOW MOUNT STABILIZER
20
2372370
BODY, BOW MOUNT STABILIZER
22
2263107
NUT-HEX 3/4-10 UNC NYLON
B
2994934
BAG ASM, EL.STEER STABILIZER
Item 24
24
2263434
SCREW-#8-18X1" PPH S/S
26
2370870
CLAMP-STRAP, BOW MOUNT STABILIZER
28
2383479
SCREW, #6-19X.500 PRH TYPE A SS
✖ Not shown on Parts Diagram.
▲ This part is included in an assembly and cannot be ordered individually.
NOTICE:
Images are a graphical representation and
may vary from your motor. Save the packaging! A
template for installation is printed on the back of the
card included in the packaging.
TOOLS AND RESOURCES REQUIRED
• Drill
• 9/64" Drill Bit
MOUNTING CONSIDERATIONS
The Bow Mount Stabilizer Kit is used to stabilize the motor
Shaft and Control Head to reduce bouncing when the motor
is stowed and transported. Attention to detail is needed for
successful installation. Before mounting the Bow Mount
Stabilizer Kit, give consideration to the following:
1.
Minn Kota recommends mounting the Bow Mount
Stabilizer Bracket along the trolling motor Shaft reasonably
close to the Control Head when the motor is stowed.
2.
Boats vary in the construction of the deck and gunwale.
Make sure the area under the mounting
clear to drill holes and install screws. It may be necessary
to shim or
modify the deck or gunwale under the mounting
location to create a flat area for the base to be mounted.
©2019 Johnson Outdoors Marine Electronics, Inc.
MKA-55 BOW MOUNT STABILIZER KIT
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
24
• #2 Phillips Screw Driver
• Awl, pencil or similar marking tool
Inboard View
Outboard View
location
is flat,
28
6
12
A
2
4
B
• Scissors
• Hack Saw
Complete Typical Installation
Complete Typical Installation
1862051
26
14
20
16
22
10
18
8
minnkotamotors.com | 1
Publicité
