Clean The Mold; Wash The Mold - oticon Alta2 Pro Instructions D'utilisation

Masquer les pouces Voir aussi pour Alta2 Pro:
Table des Matières

Publicité

Clean the mold

The mold should be cleaned
regularly. Use a soft cloth to
clean the surface of the mold.
Use the MultiTool wire loop
to clean the opening.
26
About Start up
Handling
Options Warnings More Info
Replace the tube
The tubing between the mold
and the instrument should be
replaced when it becomes
yellow or stiff. Consult your
Hearing Care Professional in
relation to this.

Wash the mold

Step 1
Step 2
Make sure you are
Disconnect the
able to identify which
tube and mold from
mold is for which
the hook. Hold the
instrument before
hook firmly when
disconnecting them
pulling off the tube.
from the instruments.
Otherwise the
instrument may
be damaged.
Step 3
Wash the mold
and tube using mild
soap. Rinse and dry
completely before
reconnecting to the
hearing instrument.
27

Publicité

Table des Matières
loading

Table des Matières