Installation Steps; Package Contents; Hardware Overview - Axis Communications 291 1U Mode D'emploi

Installation Guide
This Installation Guide provides instructions for installing AXIS 291 1U Video Server Rack which can
hold up to three Axis blade video servers. To install the Axis video server on the network, please
see the video server's own installation guide on www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 7 .
2. Study the hardware overview. See page 7 .
3. Study the specifications. See page 9 .
4. Install the hardware. See page 12.

Package Contents

• AXIS 291 1U Video Server Rack
• Front panel cover 1U (x2)
• AC power cord, see page 9
• Mounting kit
- Rubber foot (x4) for placement on flat surfaces
- Mounting bracket (left side)
- Mounting bracket (right side)
- M3x8 screws for attachment of side brackets
- M6x20 screws for mounting AXIS Video Server Rack in equipment rack
- Terminal connector block, 12–pin, green
• Printed materials
- Installation Guide (this document)

Hardware Overview

1
1
Power connector
AXIS 291 1U Video Server Rack
2 3 4
7
5 6