Led Indicators - Axis Communications 291 1U Mode D'emploi

AXIS 291 1U Video Server Rack
2
I/O Terminal Connector 3
3
I/O Terminal Connector 2
4
I/O Terminal Connector 1
5
Power and Network LEDs
6
Network Connector

LED Indicators

10/100 LED
Red
Green
1000 LED
Green
Power LED
Green
Connectors and Buttons
For specifications and operating conditions, see page 9 .
Network Connector
RJ45 Ethernet connector.
I/O Connector
Use with external devices in combination with, for example, tampering alarms, motion detection,
event triggering, time lapse recording and alarm notifications. In addition to the 0 V DC reference
point and power (DC output), the I/O connector provides the interface to:
• Digital output – For connecting external devices such as relays and LEDs. Connected
devices can be activated by the VAPIX® Application Programming Interface, output
buttons on the Live View page or by an Action Rule. The output will show as active
(shown under System Options > Ports & Devices) if the alarm device is activated.
• Digital input – An alarm input for connecting devices that can toggle between an open
and closed circuit, for example: PIRs, door/window contacts, glass break detectors,
etc. When a signal is received the state changes and the input becomes active (shown
under System Options > Ports & Devices).
Indication
Flashes for connection to a 10 Mbit/s network.
Flashes for connection to a 100 Mbit/s network.
Indication
Flashes for connection to a 1 Gbit/s network.
Indication
Normal operation.
8