Installation Steps; Package Contents - Axis Communications P7224 Mode D'emploi

AXIS P7224 Installation Guide
AXIS P7224 Video Encoder Blade
This installation guide provides instructions for installing the AXIS P7224 Video Encoder Blade on
your network. For all other aspects of using the product, please see the User Manual, available on
the CD included in this package, or from www.axis.com/techsup
Important!
• To mount the hardware in either the AXIS 291 1U Video Server Rack or the AXIS Q7900
Rack, please see the Installation Guide for the respective encoder rack
• This product must be used in compliance with local laws and regulations.

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 6.
3. Install the hardware. See page 7.
4. Assign an IP address. See page 8.
5. Set the password. See page 11.

Package contents

Item
Video encoder
CD
Printed Materials
Contact your dealer if anything is missing or damaged.
Installation Guide
Models/variants/notes
AXIS P7224
AXIS Network Video Product CD, including product documentation,
installation tools and other software
AXIS P7224 Installation Guide (this document)
Axis Warranty Document
Extra serial number label
Page 5