Manfrotto 521 Manuel D'instructions page 8

GB
Model 521
1. Switch the camera off
2. Connect the other end of the cable to the camera LANC plug
3. Switch the camera – now you may start using the controller
After switching the camera on, the LANC controller LED indicator
should light continuously.
LED indicator not lighting at all means problem with power supply
of the controller.
LED indicator blinking means problem with LANC communication.
In either case check the LANC cable connections to camera and
controller.
Controller is designed to work only with video cameras having the
2.5 mm stereo LANC jack. Never connect controller to any other
jack, which does not have the LANC logo. It may even result in per-
manent controller and/or camera damage!
LANC controller is designed as a standalone control system for
video cameras - it is not designed to work simultaneously with
other LANC control systems
Model 521P
1. Switch the camera off
2. Connect the other end of the cable to the camera REMOTE
plug
3. Switch the camera – now you may start using the controller
Remote Zoom Controller is designed to work only with PANASON-
IC AG-DVX100 and AG-DVC80 video cameras, which have the 2.5
mm stereo jack marked "CAM REMOTE".
Never connect the controller to any other jack. It may even result in
permanent controller and/or camera damage!
Model 521PRO
1. Switch the camera off
2. Connect the other end of the cable to the camera LANC plug
3. Switch the camera – now you may start using the controller
>>>
8