Kinderkraft ENOCK Guide D'utilisation page 16

• Always check the security and the stability of product before use.
• Make sure that any harness is correctly fitted.
• Do not move or lift the product while the child is inside.
• Do not use the product until the child can sit up unaided.
• Keep children away when assembling and disassembling the product to avoid injury.
• High chair is intended for children able to sit up unaided and up to 3 years or a
maximum weight of 15 kg.
• Don't use the product if any part is broken, torn or missing.
• Product located under a window could be used as a step by the child and cause the
child to fall out of the window.
• Accessories or replacement parts other than those approved by the manufacturer
must not be used.
• Child seat mode: Recommended age: from 36 months to 10 years, max 35 kg.
B. Part list (figures 1-18)
1 Right leg
2 Left leg
3 Bar
4 Cross-bar x2
5 Backrest
6 Small board
7 Large board
8 Bow-shaped handle with safety belts
9 Bolt (M5x45) x4
C. Position selection for the baby highchair and the chair for older children:
Baby highchair:
In this position the small board is used as a seat and can be set only at the highest position, i.e. 555 mm over
the floor at the position 10. The large board serves as a leg rest and can be set in the positions 3-4-5,
depending on a baby foot position. Use the tray and the bow-shaped handle with safety belts. The highest
10 Bolt (M6x30) x2
11 Cylinder nut (M6x12) x4
12 Allen wrench
13 Bolt (M6x50) x4
14 Narrow backrest board
15 Nut (M5) x4
16 Tray
17 Tray fitting x2
18 Bolt (M6x14) x4
16