Initial Hdd Configuration - Conceptronic CH3MNAS Mode D'emploi

ENGLISH

5.2 Initial HDD configuration

When you login to the web-based configuration of the CH3MNAS for the first time, you need to choose a
HDD configuration and format the HDD's. There are 4 available HDD configuration options:
• Standard
: Each drive is an unique volume.
• JBOD
: Combines both drives in a linear fashion to create 1 volume.
• RAID 0
: Provides data striping (Maximum performance).
• RAID 1
: Provides data mirroring over both disks (Maximum backup security).
A. Select the HDD configuration that you want to use and click "Next" to proceed.
B. A message to confirm the re-format of the HDD's will be shown. Click "OK" to proceed.
C. Select the file system for your HDD configuration. You can choose between:
• EXT2
: Allows the best performance on the CH3MNAS
• EXT3
: Allows the best stability of the CH3MNAS
Click "Next" to proceed.
Depending on the chosen HDD configuration at step A, the steps below are valid for your configuration.
• If you have selected "RAID 0" or "RAID 1", proceed to step D of this chapter.
• If you have selected "Standard" or "JBOD", the format of the HDD configuration is initialized when you
have clicked "Next" at step C of this chapter. You can proceed to step E of this chapter.
44
[ HDD configuration – Select RAID type ]
[ HDD configuration – Select file system ]