Hardware Installation; Hdd Installation - Conceptronic CH3MNAS Mode D'emploi

ENGLISH

3.1 HDD installation

A. Slide the lock switch (located on the
bottom of the front panel) to the
right position to unlock the front
panel.
B. Slide the front panel up and pull it off
the CH3MNAS to access the HDD bays.
C. Insert 1 or 2 SATA 3.5" hard disk
drives into the available drive bays
until they are firmly connected to
the SATA slot on the server.
Note: The upper HDD bay is the primary HDD bay, the bottom HDD bay is the secondary HDD bay.
If you want to install only 1 HDD, use the upper HDD bay.
The hard disk in the upper HDD bay is initialized as Volume_1 (/mnt/HD_a2).
The hard disk in the lower HDD bay is initialized as Volume_2 (/mnt/HD_b2).
36

3. Hardware installation