Conceptronic CH3MNAS Mode D'emploi page 41

When the CH3MNAS is found and selected, you can use the following functions in the utility:
Search
At the "Search" page, you can search and select NAS devices in your network, allowing you to use the
other options of the utility as described below.
Note: If no servers are detected, click the "Search Device" button to re-scan your network. If there are
still no results, check the connection of your CH3MNAS on the network and if the device is turned
on.
Device Setting
At the "Device Setting" page, you can change the Hostname and the Workgroup of the CH3MNAS.
When you have changed the settings, click "Apply" to apply the changes.
Note: The Workgroup refers to the name of your network. For most Windows computers, the default
workgroup is "Workgroup".
IP Setting
At the "IP Setting" page, you can view and change the IP configuration of the CH3MNAS.
• If "DHCP Client" is set to "Enable", the CH3MNAS will obtain an IP address from a DHCP server in your
network automatically.
• If "DHCP Client" is set to "Disable", you can enter the IP Address, Netmask and Gateway manually.
When you have changed the settings, click "Apply" to apply the changes.
ENGLISH
41