Conceptronic CH3MNAS Mode D'emploi page 37

You can secure the HDD's by fastening
them to the CH3MNAS with the included
HDD screws.
D. Slide the 2 side panels to the front of
the CH3MNAS.
E. Fix the HDD's with the included HDD
screws to the CH3MNAS.
Note: Remember to fix the hard disk(s)
on both sides of the CH3MNAS.
F. Slide back the 2 side panels.
G. Put the front panel back on the
CH3MNAS and slide it down to fix it.
H. Slide the lock switch (located on the
bottom of the front panel) to the left
position to lock the front panel.
Note: To remove the HDD's, make sure the CH3MNAS is turned off, the front cover is removed and the
HDD screws fixed in step E are removed. You can easily remove the HDD's by pulling them at the
front side of the CH3MNAS.
ENGLISH
37