Web-Based Configuration; Accessing The Ch3Mnas Web-Based Configuration - Conceptronic CH3MNAS Mode D'emploi

Some basic settings of the CH3MNAS can be configured through the Grab'n'Go Easy Finder, as described in
chapter 4 of this manual. The complete configuration of the CH3MNAS can be done through the web-based
configuration of the CH3MNAS.

5.1 Accessing the CH3MNAS web-based configuration

You can enter the web-based configuration in 2 ways:
A. Select the CH3MNAS in the Grab'n'Go Easy Finder and click the "Management" button.
B. Start your web browser (like: Internet Explorer, Firefox, Safari or Chrome) and enter the IP address
or hostname of the CH3MNAS in the address bar.
(By default: http://192.168.0.25/ or http://CH3MNAS/ )
Note: If the CH3MNAS is connected to a DHCP enabled network, the CH3MNAS will automatically
obtain an IP address from the DHCP server in your network. In that case, it is advised to use
the Grab'n'Go Easy Finder as described in step A to connect to the CH3MNAS.
The Login page of the CH3MNAS will be shown.
Enter the username and password and click the "Login" button to enter the web configuration of the
CH3MNAS. (Only the administration user "admin" is allowed to change or modify the configuration
settings.)
Note: The default login is: admin (no password is required).

5. Web-based configuration

[ CH3MNAS - Login page ]
ENGLISH
43